NCM EOS/EOL

NCM EOS/EOL

Network Configuration Management

NCM EOS/EOL

Track the End-of-Sale and End-of-Life lifecycle of your network devices. See which devices have expired support, which are approaching it, and which models still need to be matched to vendor lifecycle data.

Overview

NCM EOS/EOL matches each network device against published vendor lifecycle data to report where it sits in the hardware lifecycle: still fully supported, past End of Sale, or past End of Support. This lets teams find devices that are out of support or approaching it, and plan refreshes before a device stops receiving security fixes.

A device is matched to lifecycle data by its vendor and model. A device that has been matched is Verified and carries its End of Sale and End of Support dates; a device that has not been matched is Unverified and has no dates until its model is recognised. All views are accessible under Network → NCM → EOS/EOL, which contains a Dashboard and an All Devices view.

Lifecycle Statuses

Every device is assigned a lifecycle status, used throughout the dashboard and the All Devices list.

StatusMeaning
ExpiredThe device's End of Support date has passed. It no longer receives vendor support or security fixes and should be prioritised for replacement.
Sale DiscontinuedThe device has passed its End of Sale date, so it is no longer sold, but it is still within its support window.
EOL AnnouncedThe vendor has announced End of Sale or End of Support dates for the device, but those dates have not yet been reached.
UnannouncedThe device is active and the vendor has not announced any End of Life dates for it.
UnverifiedThe device's model has not been matched to vendor lifecycle data, so no dates are available yet. Often the model was not reported or is not recognised.

EOS/EOL Dashboard

Navigate to Network → NCM → EOS/EOL → Dashboard. The dashboard opens with three summary panels, then breaks lifecycle status down by vendor and lists the devices that need attention.

PanelWhat it shows
End of LifeDevices that need attention, split into Expired, Sale Discontinued, and EOL Announced.
Lifecycle CoverageHow complete the picture is, split into Verified and Unverified, against the total device count.
Active DevicesDevices still in service, split into Unannounced and those With EOL Dates.
EOL Summary by VendorA per-vendor bar showing how that vendor's devices are distributed across the lifecycle statuses.
Recently Expired DevicesDevices whose support has recently lapsed, with the vendor, model, expired date, and how long ago it expired.
Upcoming EOLsDevices approaching End of Support, with the vendor, model, End of Support date, and time remaining.
Unverified ModelsDevices whose model has not been matched to lifecycle data, with the host, IP address, vendor, model, and SysObjectID, so the gap can be investigated.

Filter from the dashboard. The status circles on the three summary panels are interactive. Clicking a circle under End of Life (Expired, Sale Discontinued, or EOL Announced), Lifecycle Coverage (Verified or Unverified), or Active Devices (Unannounced or With EOL Dates) opens the All Devices view filtered to that status.

All Devices

Navigate to Network → NCM → EOS/EOL → All Devices for the full device list. Tabs across the top filter the list by status: All Devices, Expired, Sale Discontinued, EOL Announced, Unannounced, and Unverified, each showing its device count. The list shows the following columns.

ColumnDescription
Host Name / IP AddressThe device name and its IP address.
Vendor / Category / ModelThe device manufacturer, its category such as Switch or Firewall, and the model matched to lifecycle data.
StatusThe lifecycle status of the device, as defined in Lifecycle Statuses.
End Of Sale Date / End Of Support DateThe dates the device stops being sold and stops being supported. Blank for Unverified devices.
Support WindowHow long until support ends, or how long ago it ended, relative to today.

Troubleshooting

IssueWhat to check
A device shows as Unverified with no datesThe device's model has not been matched to lifecycle data. Check the Unverified Models panel for its reported model and SysObjectID. A device that does not report a recognised model cannot be matched, so no End of Sale or End of Support dates are available for it.
A device's status looks wrong for its ageConfirm the matched Model in the All Devices list is the correct one for the device. Status is derived from the End of Sale and End of Support dates of the matched model, so an incorrect model match produces incorrect dates.
Expected devices are missing from EOS/EOLEOS/EOL covers NCM-managed network devices. Confirm the device is discovered and managed under NCM so it appears in the lifecycle views.