SIEM Integration: Sentinel, QRadar, Elastic | Cloudmon

SIEM

Third Party Integration

SIEM

Forward Cloudmon alarms, audit events, and application logs to SIEM platforms such as Microsoft Sentinel, IBM QRadar, or Elastic over Syslog.

Overview

The SIEM integration forwards selected Cloudmon data over Syslog to any syslog-compatible receiver, such as Microsoft Sentinel, IBM QRadar, or Elastic. You choose which data to send and the message format, including CEF for SIEM platforms that expect it. Once the integration is enabled, the selected data sources are forwarded automatically.

For Splunk, including the Splunk HTTP Event Collector, see Splunk.

Data sourceWhat is forwarded
Forward AlarmsAlarms when they are raised, updated, and cleared. Selected by default.
Forward Audit EventsAudit events, which record the actions users take in Cloudmon. Selected by default.
Forward Application LogsCloudmon application logs at warning and error level. Not selected by default.

Before You Begin: Collect Details from Your SIEM

You need the host and port of a syslog receiver for your SIEM platform. Use UDP port 514, or TCP for reliable delivery. If your SIEM expects Common Event Format, such as ArcSight or QRadar, plan to use the CEF format.

Configuring the SIEM Integration

  1. Navigate to Settings → General Settings → Integrations. In the SIEM & Security group, click Add on the SIEM card.
  2. Complete the Connection, Log Format, and Data Sources sections, as described in the following tables.
  3. Click Test Connection to verify that Cloudmon can reach the receiver.
  4. Turn on Enable SIEM Integration.
  5. Click Save.

Connection fields:

FieldDescription
Name*A name for the integration, such as the SIEM platform it sends to.
Host*The address of the syslog receiver.
Port*The receiver port. The default is 514.
ProtocolUDP or TCP. Use TCP for reliable delivery.

Log Format fields:

FieldDescription
Format*The message format, such as RFC 5424 Syslog, or CEF for ArcSight, QRadar, or any SIEM that accepts Common Event Format over syslog.
Source HostnameThe host name that identifies Cloudmon in the forwarded messages. If left empty, cloudmon-controller is used.

Data Sources: select the data to forward, as described in the Overview.

Troubleshooting

IssueWhat to check
Test Connection failsCheck the host and port, and that the protocol (UDP or TCP) matches the receiver. Confirm that the Controller can reach the receiver on that port through any firewall.
No data arrives in the SIEMConfirm that Enable SIEM Integration is turned on and that at least one data source is selected. Check that the format matches what the SIEM receiver expects.