How to initiate Network Discovery?

How to initiate Network Discovery?

i) Hover on Settings > Monitoring > Network discovery
ii) Click on + icon in the top right corner for adding a new discovery
iii) Provide the IP range needed and the Protocol to be used for discovery
iv) The supported protocols for discovery are ICMP, TCP & SNMP

Refer Network Discovery for more details.

    • Related Articles

    • How to discover and specify network devices for monitoring?

      Go to the Add Discovery form and select Host as the type, and SNMP as the protocol. Add SNMP credentials, initiate discovery, and then use the Select All option in the Discovery Devices table to add the devices to monitoring.

    • Is it possible to automatically discover devices in our network using Cloudmon?

      Yes, Cloudmon supports two types of network discovery Network Discovery using ICMP, TCP & SNMP protocols - Cloudmon detects most devices in your network. Devices discovered using ICMP & TCP could be added to availability monitoring in bulk from the ...

    • How to create and view the network topology in Cloudmon?

      Configure a seed router using SNMP credentials. Using this see router Cloudmon can identify all the link details for connected network devices using CDP and LLDP protocols. Cloudmon will automatically discover the topology map and display it. Refer ...

    • Is it possible to discover Layer-2 devices using Cloudmon?

      Yes, Layer 2 devices (e.g., LAN switches) can be discovered from Cloudmon. refer Network Discovery for more details

    • Network Discovery

      Network Monitoring Network Discovery Automatically scan IP ranges to discover all devices, services, and SNMP-enabled infrastructure on your network. Cloudmon supports ICMP, TCP, and SNMP discovery protocols, letting you move from scan to active ...