Is it possible to discover Layer-2 devices using Cloudmon?

• Related Articles

• Is it possible to automatically discover devices in our network using Cloudmon?

  Yes, Cloudmon supports two types of network discovery Network Discovery using ICMP, TCP & SNMP protocols - Cloudmon detects most devices in your network. Devices discovered using ICMP & TCP could be added to availability monitoring in bulk from the ...

• How to create and view the network topology in Cloudmon?

  Configure a seed router using SNMP credentials. Using this see router Cloudmon can identify all the link details for connected network devices using CDP and LLDP protocols. Cloudmon will automatically discover the topology map and display it. Refer ...

• Can Cloudmon monitor Network Devices?

  Yes, Cloudmon can monitor network devices like Firewalls, Servers, Switches and Routers etc. using SNMP.  For network devices which do not support SNMP, Cloudmon can perform availability using IP Endpoint monitoring feature. In addition, Cloudmon is ...

• Cloudmon UserGuide

  Overview Purpose With the increased deployment of applications in hybrid environments, spanning on-premises, data-center and public cloud, have forced IT teams to do more with less. The introduction of newer technologies leads to IT tool sprawl over ...

• How to initiate Network Discovery?

  i) Hover on Settings > Monitoring > Network discovery ii) Click on + icon in the top right corner for adding a new discovery iii) Provide the IP range needed and the Protocol to be used for discovery iv) The supported protocols for discovery are ...