NCM Firmware Vulnerabilities

NCM Firmware Vulnerabilities

Network Configuration Management

NCM Firmware Vulnerabilities

Assess the firmware running on NCM-managed network devices against known CVEs. Identify exposed devices, review vulnerability severity and exploit status, and see the recommended firmware upgrade.

Overview

NCM Firmware Vulnerabilities compares the firmware or OS version Cloudmon has read from each NCM-managed network device against published Common Vulnerabilities and Exposures (CVE) data. For each device it reports the vulnerabilities that affect the running version, their severity and exploit status, and the version the device should be upgraded to. This turns the configuration data NCM already collects into a security view of which devices are exposed and how urgently they need patching.

Vulnerabilities are graded by CVE severity as Critical, Important, Moderate, or Low. These are the severities published with the CVE data and are separate from the Cloudmon alarm severities of Critical, Trouble, and Attention. All views are accessible under Network → NCM → Firmware Vulnerabilities, which contains a Dashboard, a Devices view, and a Version Distribution view.

Enabling Assessment (Firmware Parser)

A device is only assessed for vulnerabilities when the NCM Template it uses has a Firmware Parser configured. The parser tells Cloudmon how to read the device's firmware details from its command output and which CVE product to match them against. A device whose template has no CVE Product set is left Unassessed.

Navigate to Network → NCM → Templates, add or edit the Custom template used by the device, and expand the Firmware Parser section. Configure the fields as follows.

FieldDescription
CVE ProductThe vendor product used to look up this device's firmware against CVE data. Selecting a product enables vulnerability assessment for every device using this template. The default, Not matched against CVE data, leaves those devices unassessed.
Source CommandThe command run on the device that returns its version information, for example show version. Its output is what the version and model patterns are applied to.
OS Version PatternA regular expression that extracts the OS or firmware version from the Source Command output, for example Version\s+([^\s.]+). This version is what gets matched against CVE data.
Model PatternA regular expression that extracts the device model from the output. Leave empty to skip.
Serial Number PatternA regular expression that extracts the serial number from the output. Leave empty to skip.

Note: Global templates already carry a Firmware Parser where Cloudmon supports CVE matching for that device type. When a Global template does not, clone it to a Custom template and configure the Firmware Parser, since Global templates are read-only.

Firmware Vulnerabilities Dashboard

Navigate to Network → NCM → Firmware Vulnerabilities → Dashboard. The dashboard summarises exposure across three panels, then lists the individual CVEs found across your devices. The list header shows how many CVE records and how many vendors the current assessment draws on.

PanelWhat it shows
VulnerabilitiesThe total number of distinct vulnerabilities found, broken down by Critical, Important, Moderate, and Low.
Exposed DevicesThe number of devices found to have at least one vulnerability, broken down by the highest severity affecting each.
Assessment CoverageHow many NCM-managed devices have been Assessed, Unassessed, Failed, or Not Yet Run, showing how complete the vulnerability picture is.
Vulnerabilities tableEach CVE found, with its CVE ID, Base Score, Severity, CVE Type and its CWE weakness class, Exploit Status (such as Known Exploited), the number of Affected Devices, and the version it is Fixed In. The list can be searched and exported.

Filter by severity. The severity circles in the Vulnerabilities panel (Critical, Important, Moderate, Low) are interactive. Click a severity to filter the list to CVEs of that severity, and click it again to clear the filter.

CVE detail. Click any CVE in the list to open a detail panel with its full description, CVSS base score and vector, CWE type, and links to external references such as NVD, the CISA Known Exploited Vulnerabilities catalog, and vendor advisories. The panel also lists the affected devices, showing each device's running version and why it matched, such as the running version falling within the vulnerable range.

Devices

Navigate to Network → NCM → Firmware Vulnerabilities → Devices for a per-device view of assessment state. The list shows every NCM-managed device with the following columns.

ColumnDescription
Device / HostThe device name and its host address.
Vendor / Model / FirmwareThe vendor, model, and firmware version read from the device, as extracted by the template's Firmware Parser.
StatusThe assessment state of the device: Vulnerable when one or more CVEs affect its firmware, Unassessed when it has not yet been checked, or Check Failed when the assessment could not complete.
FindingsThe number of vulnerabilities found, broken down by severity, for example 1 critical, 3 important, and 2 moderate.
Recommended UpgradeThe firmware version that resolves the findings on the device.
ActionWhether the device can be assessed, and a control to re-run its assessment.

Selecting a device opens an Assessment panel that shows what the assessment compared, for example the running version checked against the CVE records for that product, along with when it was last assessed and when the firmware was read. A Re-evaluate this device control re-runs the assessment against the latest CVE data, and the device's Vulnerabilities list shows each finding with its severity, CVE type, the version it is fixed in, any Known Exploited flag, and the version-range reasoning behind the match. A device that has not been assessed reports Vulnerabilities (0) and is flagged as not known to be clean, which is different from a device that has been assessed and found to have no vulnerabilities.

Version Distribution

Navigate to Network → NCM → Firmware Vulnerabilities → Version Distribution to see how firmware versions are spread across the managed estate. Each row lists the vendor, the firmware version, the number of devices running it, the total and critical vulnerability counts for that version, and the recommended upgrade. This identifies how many devices run each version, making it easy to size the impact of a vulnerable release and plan a coordinated upgrade.

Reports

Cloudmon provides scheduled reports for firmware vulnerabilities. Navigate to Reports → Schedule Report and select the NCM Firmware Vulnerability Report for an estate-wide summary, the NCM Device Vulnerability Report for a per-device breakdown, or the NCM Vulnerability Detail Report for full CVE-level detail. Each can be scheduled and delivered to selected recipients. Learn more.

Troubleshooting

IssueWhat to check
A device stays UnassessedConfirm the device's NCM Template has a Firmware Parser with a CVE Product selected. A template left on "Not matched against CVE data" produces no assessment. Also confirm the device has a successful NCM backup, since the parser reads the collected command output.
Firmware column is blank or the version is wrongCheck the OS Version Pattern in the template's Firmware Parser against the actual Source Command output. If the regular expression does not match, no version is extracted and the device cannot be matched to CVE data.
Assessment Coverage shows Failed devicesOpen the device and use Re-evaluate this device. If it fails again, confirm the Source Command runs on that device and returns version output, and that the backup used for the assessment is current.
Dashboard reports CVE data unavailableVulnerability matching depends on CVE data being available to the Controller. Confirm the Controller can retrieve CVE data, then re-evaluate the affected devices.