When a new device is added, will Cloudmon automatically map it or should it be manually added?

• Related Articles

• Can I receive notifications when a device goes down in cloudmon?

  Yes, you can configure alarms to receive notifications when a device goes down in Cloudmon Here's how you can set it up: 1. Navigate to Settings > Configurations > Alarm rules in the Cloudmon web interface. 2. Click the '+' icon to add a new alarm ...

• Is it possible to automatically discover devices in our network using Cloudmon?

  Yes, Cloudmon supports two types of network discovery Network Discovery using ICMP, TCP & SNMP protocols - Cloudmon detects most devices in your network. Devices discovered using ICMP & TCP could be added to availability monitoring in bulk from the ...

• Network Discovery

  Network Monitoring Network Discovery Automatically scan IP ranges to discover all devices, services, and SNMP-enabled infrastructure on your network. Cloudmon supports ICMP, TCP, and SNMP discovery protocols, letting you move from scan to active ...

• How to create and view the network topology in Cloudmon?

  Configure a seed router using SNMP credentials. Using this see router Cloudmon can identify all the link details for connected network devices using CDP and LLDP protocols. Cloudmon will automatically discover the topology map and display it. Refer ...

• How to initiate Network Discovery?

  i) Hover on Settings > Monitoring > Network discovery ii) Click on + icon in the top right corner for adding a new discovery iii) Provide the IP range needed and the Protocol to be used for discovery iv) The supported protocols for discovery are ...